Components Diagram
(not contractual, for reference only)
| Legend | Documents | Ground Floor | Roofing | First Floor
Doors and Windows | Finishing | Utilities | List of Materials | Request Information |
       |
 |
 |
MATERIALS INCLUDED IN OUR KIT |
 |
MATERIALS NOT INCLUDED IN OUT KIT |
|
|
ARCHITECTURAL DRAWINGS |
|
|
BUILDING GUIDE |
GROUND FLOOR MATERIALS
|
|
FOUNDATION |
|
|
PARGING |
|
|
GROUND FLOOR JOISTS |
|
|
GROUND FLOOR SUB-FLOORING |
|
|
FLASHING |
|
|
STUDS SHORING |
|
|
NAILS AND METAL STRAPS |
|
|
TONGUE-AND-GROOVE SQUARED OFF PINE LOGS |
|
|
DOVETAILED CORNERS |
|
|
WEATHER-TIGHT PAPER |
|
|
FURRING |
|
|
WALL FRAMING |
|
|
FIBERGLASS INSULATION |
|
|
VAPOR BARRIER |
|
|
SHIP LAPPED INSIDE FACING |
|
|
SQUARED-OFF PINE COLUMNS |
|
|
COLUMN ANCHORING SYSTEM |
|
|
KEYS AND T-SHAPED MOLDINGS |
|
|
ROUGH FRAMES AND MOLDINGS |
|
|
EXTENSION HALF-COLUMNS |
|
|
LINTELS |
|
|
OPENINGS FLASHINGS |
ROOFING MATERIALS
|
|
EAVES DECORATIVE SUPPORTS (MOUNTAIN LODGE) |
|
|
TOP PLATE |
|
|
PREFABRICATED ROOF TRUSSES |
|
|
ROOF SHEETING |
|
|
ROOF COVERING |
|
|
DRIPS |
|
|
PREFABRICATED GABLE DORMERS |
|
|
GABLE WALLS DROP-SIDING |
|
|
BUILDING PAPER |
|
|
FIBERBOARD SHEETING |
|
|
FRIEZE |
|
|
FLY RAFTERS |
|
|
ROOF OVERHANGS SOFFITS |
|
|
BULL'S EYE |
|
|
ROOF VENTS |
FIRST FLOOR MATERIALS
(for TWO-STORY MODELS)
|
|
FIRST FLOOR GIRDER |
|
|
FIRST FLOOR JOISTS |
|
|
FIRST FLOOR SUB-FLOORING |
|
|
SOLE PLATE |
|
|
DWARF PARTITION |
|
|
GYPSUM BOARDS |
|
|
STAIRWAY AND HANDRAIL |
|
|
PENT ROOF |
|
|
WINDOWS AND EXTERIOR DOORS |
|
|
INTERIOR DOORS |
FINISHING MATERIALS
|
|
BASE BOARDING |
|
|
MOLDINGS |
|
|
VINYL RUNNER OR TEXTURED PAINT |
|
|
EXTERIOR STAIN |
|
|
FLOOR COVERING |
|
|
PAINT AND WALL COVERING |
|
|
INTERIOR PARTITIONS |
|
|
CEILINGS AND FALSE BEAMS |
|
|
KITCHEN CABINETS |
|
|
BATHROOM VANITY |
|
|
ELECTRICITY AND FIXTURES |
|
|
PLUMBING AND FIXTURES |
|
|
HEATING AND COOLING SYSTEM |
|
|
WELL AND SEPTIC TANK |
|
|
FIREPLACE |
LIST OF MATERIALS SUPPLIED IN OUR BASIC KITS
Squared-off treated
pine logs 64 mm x 241 mm (3" x 10") planed and pre-soaked.
Treated pine columns planed and
pre-soaked (same thickness as logs).
Keys 16 mm (1" x 3") System at the
bottom of each column.
Weather-tight gasket on sub floor
(under the flashing)
Metal flashing under the first row of
logs.
Galvanized corrugated iron strip under
the first row of logs.
Outside T-shaped molding each side of
columns.**
16 mm x 64 mm (l in x 3 in.) furring
behind the log wall.
Weather-tight paper behind the log
wall and for upper walls.
Wall framing 38 mm x 140 mm (2" x 6")
studs for 600 mm (24") spacing behind the log wall.**
Inside drop siding behind the log wall
except on service room and bedroom walls (as indicated on price list).**
25 mm x 25 mm (1-1/8" x 1-1/18")
inside molding in corners where drop siding is required.**
* Wood beams supporting the second
floor with a maximum spacing of 1,2 m (4').
* 38 mm (2") tongued and grooved pine
boards for the second floor.
* 38 mm x 140 mm (2" x 6") plate on
the upper sub floor.**
Prefab trusses for 600 mm (2')
spacing. **
89 mm x 241 mm (4" x 10" ) eaves
decorative supports (for Mountain Lodge Classic version only).
* Upper wall framing, 38 mm x 140 mm
(2" x 6" studs for 610 mm (2') spacing. **
* Prefab dormers. ** (As per plan)
Roof sheathing, 12,5 mm x 1220 mm x
2440 mm (1/2" x 4" x 8") standard type spruce plywood panels.
38 mm x 89 mm (2" x 4") lookout
rafters, 610 mm (24") spacing for gable and overhang roof.**
Fascia board, 29 mm x 140 mm (1-1/4" x
6") pine board along the roof edge.**
16 mm (1") Tongue and groove pine
boards for upper and dormer wall siding.**
16 mm x 64 mm (1" x 3") Furrings
behind upper and dormer wall siding.
16 mm (1") Tongue and groove pine
boards for roof overhang soffit.**
Bulls-eye (decorative frame for
ventilation).
3 coats of stain for outside part of
logs, siding and frieze soffit.
All nails and metal straps required
for the log wall mounting.
Shoring studs twenty 3,7 m x 38 mm x
89 mm (12' x 2" x 4") and six 3,7 m x 38 mm x 140 mm
(12' x 2" x 6").**
Plywood sheets 12,5 mm x 1220 mm x
2440 mm (1/2" x 4' x 8') for exterior upper walls.
* For 2 story houses.
** Kiln dried wood.